BELTSCALE BELTWEIGHER

BELT SCALE, BELTSCALE, BELT WEIGHER BELTWEIGHER, SCALE CONVEYOR

COMPANY
PT. BINTANG MAS WICAKSANA adalah perusahaan yang bergerak di weighing system sejak tahun 1991, produk yang kami supply adalah produk yang memiliki kualitas handal

Produk yang kami supply :
- Belt scale / belt weigher
- Belt feeder
- Weighfeeder
- Truckscale


BELT SCALE
Belt scale adalah salah satu produk yang kami jual, Perusahaan kami berpengalaman dalam penjualan, pemasangan dan maintenance di bidang tersebut


PRINSIP BELT SCALE

Weighing on a moving conveyor belt 
Timbangan berat pada ban berjalan/bergerak
Fleksibilitas diperlukan untuk mengukur aliran materi yang terus-menerus dan berbeda. Ini adalah persyaratan yang diperlukan ban berjalan untuk mendapatkan skala yang baik. Mereka dapat digunakan hampir di mana saja: dalam lubang dan tambang industri, industri berat, atau bahan makanan dan industri kimia.

The right solution for every application / Solusi yang tepat untuk setiap aplikasi

Aplikasi termasuk produksi dan logistik, pengukuran tingkat throughput dan konsumsi untuk sistem produksi, internal menyeimbangkan pasokan dan penarikan, beban batas signalling, batching di loading Stasiun atau pre-feeder kontrol dan hukum untuk perdagangan beratnya.


APLIKASI BELT SCALE
Belt scale digunakan diberbagai macam pabrik diantaranya :
- tambang batu bara
- pabrik semen
- pabrik baja
- pabrik pupuk
- pabrik kelapa sawit
- dls


Merk BELT SCALE 
Macam-macam merk belt scale 
Belt scale merk SCHENCK
Belt scale merk RICE LAKE
Belt scale merk RAMSEY
Belt scale merk SIEMENS


KATEGORI BELT SCALE
Belt scale terdiri dua kategori yaitu
1. Single idler
2. Multi Idler

Single-idler belt scales:Multibelt BEM is a single-idler belt scale for feed rates up to approximately 4,000 t/h, whereas Multibelt BEP is a single-idler belt scale for feed rates up to around 6,000 t/h. Finally, Multibelt BED is a single-idler belt scalefor feed rates up to approximately15,000 t/h.

Multi-idler belt scales:
Multibelt  BMP is an dual-idler belt scale for feed rates up to approximately 15,000 t/h, whereas Multibelt BMC is a multi-idler belt scale for feed rates up to around 20,000 t/h.

BELT SCALE / BELT WEIGHER 

SINGLE IDLER BELT WEIGHER 

1. Single idler belt weigher BEM type

    Kapasitas 4.000 t/h

    accuracy: 1.0%

    belt speed: 6m/s

 

2. Single idler belt weigher BEP type

    Kapasitas : 6.000 t/h

    accuracy : 0.5% - 1.0%

    belt speed : 6m/s

3. Single idler belt weigher BED type

    Kapasitas : 15.000 t/h

    accuracy : 0.5% - 1.0%

    belt speed : 6 m/s

MULTI IDLER BELT WEIGHER

1. Multi-idler belt weigher BMP type

    Kapasitas : 15.000 t/h

    accuracy : 0.25% - 0.5%

    belt speed : 6m/s    

 

2. Multi-idler belt weigher BMC type

    Kapasitas : 20.000 t/h

    accuracy : 0.25%

    belt speed : 6 m/s

KOMPONEN BELT SCALE
Komponen belt scale terdiri dari :
1. Frame
2. Speed transducer
3. Load cell
4. Integrator/indicator
5. Cable

1. KOMPONEN BELT SCALE
FRAME

2. KOMPONEN BELT SCALE
SPEED TRANSDUCER

Application

Speed Transducers type FGA 20 are intended for the monitoring of the belt speed of conveyor belt systems. They are used as an optional device for Belt Weighers type MULTIBELT. The speed transducer of ATEX design is suitable for use in explosion-prone zones: 2; 1 and 22; 21.

Design

The Speed Transducer consists of a rocker swivel-mounted around an axle. The axle is held in a bracket which is attached to the equipment to be monitored (conveyor belt system). Fastened to this rocker is the measuring wheel which runs without slippage on the belt to be measured. The belt speed is monitored by means of windows in the measuring wheel and with one or two (legal-for-trade) proximity switch(es) as frequency signal and processed with an evaluation  device.  The Speed Transducer FGA 20 is completely made of galvanized steel or of stainless steel AISI 304 in a particularly corrosion-resistant version as well as in the ATEXapproved design.

 

Performance

The pulse wheel runs with a rubber  ring on the inside of the empty return belt of a conveyor belt system. The wheel rests frictionally engaged with its own weight on the belt and is set in rotation by the belt movement. Due to the non-slip drive the circumferential speed of the wheel corresponds to that of the belt. The speed of the wheel is monitored with a sensor which is energized intermittently by an alternating arrangement of windows and webs, and thus excites a frequency which corresponds to the belt speed of the conveyor belt system. This frequency is transmitted to the evaluation electronics for further processing.

 

 

 

 

 

3. LOAD CELL

4. INTEGRATOR

5. CABLE

=====================================================

untuk informasi lebih lanjut silahkan hubungi kami

not exist
http://beltscale.blogspot.com